[EU WAREHOUSE] ZENDURE SuperBase Pro 2000 2096Wh / 2000W Li-NMC Battery Portable Power Station

ZENDURE SuperBase Pro 2000 2096Wh / 2000W Li-NMC Battery Portable Power Station Built-in 4G IoT Charge to 80% in 1 Hour (EU Plug)

Charge to 80% in 1 Hour

With our patented GridFlow technology, you can charge SuperBase Pro 2000 at up to 1800W from an adequate AC outlet or generator. A full charge is just two hours away.

2000W AC Output, Ampup to 3000W

With 2000W of AC output and 3000W Ampup capability, you can power your microwave, washing machine, coffee maker, or other essentials around the house.

2,096Wh Large Capacity

SuperBase Pro 2000 is the perfect power solution for on-the-go events. Devices such as laptops, LED lamps, drones, mini fridges, and projectors can be powered by it for a prolonged period.

Equipped with UPS

SuperBase Pro has household-grade Uninterruptible Power Supply (UPS) functionality built right in. Simply connect the SuperBase Pro 2000 to a power outlet and connect your essential device to the SuperBase Pro 2000.

3,000 Cycles Battery Life

SuperBase Pro 2000 uses Li-NMC batteries to achieve 3,000 life cycles and runs to 80% capacity.

Handle and Wheels Design

With industrial-grade wheels, a telescopic aluminum handle, and a low center of gravity, SuperBase Pro is designed with “anytime, anywhere” in mind.

6.1-inch Clear Display

The 6.1-inch display shows real-time information about power usage, remaining charge, environmental conditions, and so much more.

4G IoT & App Control

SuperBase Pro has built-in GPS and 4G IoT (Internet of Things) hardware, so as long as you’ve got a 4G signal, you can manage your power station from anywhere.  Our companion app for SuperBase Pro gives you remote control, location services, and access to lots of advanced features.

FAQs

What kind of batteries does SuperBase Pro use?

SuperBase Pro 2000 uses NMC (LiNiMnCoO2) batteries with a total charge capacity of 2,096Wh, while SuperBase Pro 1500 uses LFP (LiFePO4) batteries and has a charge capacity of 1,456Wh.

What’s the difference between SuperBase Pro 1500 and SuperBase Pro 2000?

SuperBase Pro 1500 has a different battery type and capacity from SuperBase Pro 2000. Because of this, the two products have different charging and discharging times.

What is the operating temperature of SuperBase Pro?

Discharge: -20°C to +60°C (-4°F to 140F) / Charge: 0°C to 45°C (32°F to 113°F)

Does SuperBase Pro have az built-in MPPT controller?

Yes, it does.

What’s the noise level?

SuperBase Pro maxes out to about 52dB at 1 meter, but we are still testing this.

Can two products be used in parallel?

Not yet. We will develop this for future updates. However, you can connect two SuperBases together in series using an AC charging cable, using one of the them as the power source. You can connect 3 or more SuperBases like this together.

Are the wheels replaceable?

SuperBase Pro’s industrial-grade wheels are built into the product and are not replaceable.

Are there built-in fans?

Yes, there are 4 smart fans, which only run when necessary to keep the operating temperature at an appropriate level. Using the app, you can tell SuperBase Pro to prioritize either high performance or low noise.

Can SuperBase Pro ba charged by other solar panels?

Yes, SuperBase Pro can be charged by other solar panels with voltage ranging from 12V to 60V up to 600W via the XT60 port, and 60V-160V up to 1800W via the AC input. Zendure’s 200W solar panel has been thoroughly tested with SuperBase Pro and remains our recommendation.

Should I charge my SuperBase Pro to 100% right away?

The BMS (Battery Management System) needs to familiarize itself with the internal cells, so you might find that your SuperBase Pro will not charge to 100% on the first charge cycle. If you discharge the battery below 60% and try to fully recharge the battery twice, this should complete the process and give you access to the battery’s full capacity. After this, normal usage will not be affected.