URUAV UZ85 85mm 2S DIY Whoop FPV Racing Drone PNP/BNF Caddx ANT Lite Cam AIO 4IN1 CrazybeeX FC 1102 10000KV Motor 5A ESC
ONLY €63 for URUAV UZ85 85mm 2S DIY Whoop FPV Racing Drone PNP/BNF Caddx ANT Lite Cam AIO 4IN1 CrazybeeX FC 1102 10000KV Motor 5A ESC – Internal SPI Frsky Receiver
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more URUAV offers – HERE
For Banggood Coupons see – HERE
Notice:
1. This is the DIY version that comes unassembled.
2. It comes without battery and charger.
User Manual, Click Here
：
Brand Name: URUAV
Item Name: UZ85
Wheelbase: 85mm
Size: 115mmx115mmx45mm
Weight: 36g(without battery)
Compatible Battery: 2S 300mAh/350mAh/450mAh/520mAh
Features:
1. The Best worth 2S whoop PNP Kit in the market
2. 36gram 2s brushless 85mm whoop
3. New AIO 4in1 CrazybeeX flight controller
4. Smooth and powerful
5. CADDX ANT Lite Camera
Receiver Option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
No internal receiver version
Package Included:
1 X 85mm Frame
Option1: CrazybeeX FR V1.0 built-in internal Frsky SPI D8/D16 receiver
Option2: CrazybeeX FS V1.0 built-in internal Flysky SPI receiver
Option3:CrazybeeX PNP V1.0 no receiver version
4 X URUAV 1102 KV10000
1 X Gemfan toothpick 2023 Propellers(2cw+2ccw)
1 X Caddx Ant Lite 1200TVL Global WDR Nano FPV Camera
1 X 5.8G 25mw 40ch vtx (Flight controller built-in)
Specification:
Motor | Mode: 1102 10000KV Configu-ration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter:Φ1.5mm Dimension(Dia.*Len):Φ13.5mm*16mm Weight(g):2.8g No.of Cells(Lipo):1-2S |
Propellers | Blades:3 Material:PC Pitch:2.3Inch Prop Disk Diameter:52.17mm Center Thickness:5mm Center Hole Inner diameter:1/1.5mm 3 Holes Max Prop Width:8.94mm Weight:0.88g |
Flight controller | (Frsky SPI RX version) CRAZYBEEX FR V2.2 FC Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEEX FS V2.2 FC Firmware target: CrazybeeF4FS
(No receiver version) CRAZYBEEX PNP V2.2 Firmware target:CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board Size: 28.5 * 28.5MM Power Supply: 1-2S Battery Input (DC 2.9V-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 Ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky Receiver or No Receiver Built-in 5V 1A BEC Built-in Voltage Detection |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power Supply: 1S LiPo/LiPo HV Current: 5A Continuous, Peak 6A (3 seconds) Support BLHeliSuite Programmable Factory Firmware: S_H_50_REV16_7.HEX Default Protocol: DSHOT600 |
Onboard Frsky SPI D8 receiver Version | Compatible SPI BUS Receiver Frsky D8 Compatible Non EU transmitter D8 model Channels: 8CH Failsafe Support No Ground Interference ( Transmitter and receiver 1 m from the ground): 100m~200m |
Onboard Flysky SPI receiver Version | Compatible SPI BUS Receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8CH(AFHDS) or 14CH(AFHDS-2A) Failsafe Support No Gound Interference ( Transmitter and receiver 1 m from the ground): 100~200m |
No receiver version | Support sbus/ibus/spectrum/tbs crsf receiver |
Onboard 5.8g VTX | Output Power: 25mw
Frequency: 40CH
Input Voltage: 3.3V 5.5V
Current Consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race Band Smartaudio Ready |
Caddx ANT lite 1200tvl Camera | Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution 1200 TVL TV System NTSC/PAL switchable MENU SUPPORT IMAGE: 16:9 Synchronization Internal Electronic Shutter PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio >52dB (AGC OFF) Video Output: CVBS Lens: 2.1mm Min. Illumination [email protected] Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 2 DNR Dimensions 14mm*14mm Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Work Humidity: 20%~80% Weight: 1.5g (N.W.) |
ID:1741531 – SKUF92740
