URUAV UZ80 80mm Crazybee F4 Lite 1S DIY Toothpick FPV Racing Drone BNF w/ 0802 19000KV Motor Runcam Nano 3 FPV Camera
ONLY €81 for 19.5g URUAV UZ80 80mm Crazybee F4 Lite 1S DIY Toothpick FPV Racing Drone BNF w/ 0802 19000KV Motor Runcam Nano 3 FPV Camera – Compatible Frsky Receiver
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more URUAV offers – HERE
For Banggood Coupons see – HERE
Introduction:
UZ80, a new DIY Series whoop likes UZ85, can be assembled easily without soldering DIY drone.
With more simple and lighter. The ultralight power system and Canopy eqipped with runcam nano 3 camera, Let you enjoy super flying experience free indoor racing in narrow space.
UZ80, the smallest Palm toothpick FPV Racing Drone, more flying fun is waiting for you to expand.
Features:
– The Best worth 1S toothpick PNP Kit in the market – Only 19.5gram 1s Toothpick – Smooth and Powerful – Runcam Nano 3 FPV Camera
– Comes unassemble, Just Plug to build it, do not need solder, enjoy DIY Fun!
( Assemble Guide )
Brand Name: URUAV Model: UZ80
Item Name: 80mm F4 1S FPV Racing Drone Wheelbase: 80mm Size: 69mmx69mmx29mm (without propeller) Weight: 19.5g (without battery)
Recommend Lipo Battery: ( NOT Included)
1S 250mAh, around 3:40mins ; 1S 300mAh, around 4:30mins
1S 450mAh, around 6:30mins; 1S 650mAh, around 9:00mins
Package Included:
1x 80mm Frame
1x F4 AIO ESC VTX Receiver Board ( Optional Receiver Version)
4x 0802 19000KV Motor
2x HQProp 40mm 2-Blade Propeller CW
2x HQProp 40mm 2-Blade Propeller CCW
1x Runcam Nano 3 FPV Camera
Specification:
| 100% Brushless Motor | Mode: 0802 19000KV Configu-ration: 9N12P Stator Diamter:8mm Stator Length: 2mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm Weight(g): 1.8g No.of Cells(Lipo): 1S only |
| HQProp 40mm 2-Blade Propeller | Model: Micro Whoop 40mmx2 Item Name: 40mm 2-Blade Propeller Propeller Diameter: 40mm Pitch: 1 Blades: 2 Material: Poly Carbonate Hub Diameter: 5mm Hub Thickness: 5mm Shaft: 1.5mm Color: Gray Quantity: 2 CW + 2 CCW ( in same color) Weight: 0.24g |
| CRAZYBEE F4 Lite AIO Flight Controller | Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky/DSMX/DSMX receiver Built-in 5V 1A BEC Built-in voltage detection |
| Onboard 5A 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Default protocol: DSHOT600 |
| Onboard Frsky Receiver ( Optional) | SPI BUS receiver Frsky D8 Compatible Compatible Non EU transmitter D8 model Channels: 8CH Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m |
| Onboard Flysky Receiver ( Optional) | SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m Failsafe support |
| Onboard 5.8G VTX | Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready |
| Runcam Nano 3 FPV Camera | Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL Lens: 2.3mm(M6.5) FOV 140° Signal System: NTSC S/N Ratio: >50dBElectronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V [email protected] Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
ID:1842892 – SKUH50113
