SARK100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter for Ham Radio
€85
€113
SaveSavedRemoved 0
ONLY €85 for SARK100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter for Ham Radio
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more SARK100 offers – HERE
For Banggood Coupons see – HERE
Frequency Generation & Control: 1 – 60 Mhz
Source impedance: 50 Ohms
Stability: +/- 100ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range: SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
RF Output: Adjustable: 2.0 Volts pp (typ)
Power supply: Powerd by External: 12 to 15 Volts DC, 500mA
Controls: Pushbuttons (5): “Mode”, “Band”, “Config”, “Scan”, “Up”, “Down”
Switch: “Power On”
Connectors: RF Out: BNC
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Applications:
Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance
Measure feed point impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, speed factor, approximate and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length and wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
Operation button definitions:
Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance
BAND: select band from any of the available bands: 160M to 6M
CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade
SCAN: pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna
CAN(up): increase frequency and used to cancel operation for CONFIG menu
VAL(down): decrease frequency and used to validate operation for CONFIG menu
Package includes:
1 x ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio
ID:1942390 – SKUJ20313
