ONLY €76 for Machifit Ec Ed Lathe Quick Change Tool Post Set WM210V 15x15mm Tool Rest for Swing Over Bed 120-220mm – Ec
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more Machifit offers – HERE
For Banggood Coupons see – HERE
Ec Ed Lathe Quick Change Tool Post Set WM210V 15x15mm tool rest for Swing over bed 120-220mm
–Process workpieces of various angles. Using the dial, the tool holder can be rotated by 9° or multiple angles of 9° each time. Can process various angle workpieces.
–Height adjustable. The tool holder uses adjusting screws and nuts to adjust the installation height of the props, which is easy to operate.
–High efficiency. It only takes a few seconds to change the tool once, and only the tool holder is required to change the processing procedure. high working efficiency.
–High accuracy. The positioning accuracy of the replacement tool post is high, and the resetting accuracy is within 0.01m.
–High stability. The quick-change tool post is set at one time, and the processing stability is high.
–Application: Can be installed on WM210V lathes, etc.
For turning diameter is from 120mm to 220mm(4.7”–8.7”)
The tool post can fit 180mm(7″) swing bench lathe well. From cross slide surface to spindle center line height is 56mm.
Package Included: (Ec(45#steel)/Ed(304 stainless steel) optional)
Ec(45#steel)/Ed(304 stainless steel)
Recommended top slide width [mm]
Adjustable turning tool height [mm]
Turning diameter [mm]
ID:1901855 – SKUI57953