M5Stack ESP32 Core Ink Development Kit with 1.54” EInk Display IoT Terminal E-Book Industrial Control Panel
€27
€51
SaveSavedRemoved 0
ONLY €27 for M5Stack ESP32 Core Ink Development Kit with 1.54” EInk Display IoT Terminal E-Book Industrial Control Panel
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more M5Stack offers – HERE
For Banggood Coupons see – HERE
view the corresponding tutorial&quick-Start.
Description:
CoreInk is a brand new E-ink display in the M5Stack cores range. Controlled by the ESP32-PICO-D4 This new device includes a 200×200 1.54″ Black and White E-Ink Display. Compared to a regular LCD，E-ink displays are easier on the eyes, which makes them a great choice for reading or viewing for longer periods. Other benefits are the low power consumption and the ability to retain the image even if power to the display is terminated。For control the CoreInk integrates an multi-function button,A physical button, integrated status LED and buzzer.The device also includes a 390mAh Lipo，RTC(BM8563)for controlling accurate timing and deep sleep funcionality. CoreInk features independent reset and power buttons，expansion ports(HY2.0-4P，M-BUS，HAT expansion)for attaching external sensors to expand functionailty，for unlimited possibilities。
Warning: Please avoid using high refresh rates，reccommended refresh rate is(15s/per refresh), Do not expose to ultraviolet rays for a long time, otherwise it may cause irreversible damage to the ink screen.
Features:
ESP32 Standard wireless functions WiFi,Bluetooth
Internal 4M Flash
Low Power Display
180 degree viewing angle
Expansion ports
Built-in Magnet
Internal Battery
Expandable
Package Included:
1x CoreInk
1x Type-C USB(20cm)
Application
IoT Terminal
E-Book
Industrial Control Panel
Electronic Tag
EasyLoader:
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please click here to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
Pin Mapping
E-Ink Display
Screen Resolution：200×200
| ESP32 Chip | GPIO4 | GPIO0 | GPIO15 | GPIO9 | GPIO18 | GPIO23 |
| GDEW0154M09 | BUSY | RST | D/C | CS | SCK | MOS1 |
Specification:
| Resource | Parameter |
| ESP32-PICO-D4 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth |
| Flash | 4MB Flash |
| Input Voltage | 5V @ 500mA |
| Ports | TypeC*1, HY2.0-4P*1 , M-BUS Female Connector，Pin Array/ Hat Expansion |
| Screen | GDEW0154M09 | SPI Port | 200*[email protected]″ | Dpi:184 | 1-bit Black & White(Grayscale：2) | |
| Viewing Area(mm)：27.6×27.6 | Dot pitch(mm) 0.138×0.138 | Refresh Time（s） 0.82 /Partial refresh（s） 0.24 | |
| Physical Buttons | Programmable *1 ， Reset *1， Power *1 |
| LED | Green LED x 1 |
| RTC | BM8563 |
| Buzzer | Passive Buzzer*1 |
| Wifi | 2.4G 3D Antenna |
| PINS | G25, G26, G36, G23, G34, G18, G21, G22, G14, G13 |
| Battery | [email protected] |
| Working Temp | 32°F to 104°F ( 0°C to 40°C ) |
| Net Weight | 32g |
| Gross Weight | 55g |
| Dimensions | 56*40*16mm |
| Package Size | 82*46*20mm |
| Case Material | Plastic ( PC ) |
ID:1768581 – SKUG64404
