Home » RC Toys & Drones » IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-lite

RC Toys & DronesBanggood

-41%

IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-lite

€32 €54

BUY WITH COUPON

Buy this item

IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-lite

€32 €54

BUY WITH COUPON Buy this item

SaveSavedRemoved 0

236 Views

ONLY €32 for IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-lite

*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line

For more IRangeX offers – HERE

For Banggood Coupons see – HERE

IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-lite  Brand name: IRangeX Operating voltage:5-9V                           Operating current: <=180mA     Operating frequency: 2.4G ISM band                RF power: +22dBm     MCU: STM32F103CBT6(128K ROM, 20K RAM)     Weight: 32g    Overview: This 4-in-1 TX  module is suitable for FRSKY X-Lite. It integrates four RF chips (CC2500,NRF24L01+,A7105,CYRF6936) into one single circuit board, it supports a variety of remote control protocols, such as Futabas S-FHSS, Walkera DEVO, Spektrum DSM2, DSMX, Flysky, Frsky, WLToys, Hubsan, Hisky, Esky , Assan etc. You can control your model flexibility with it, and you will get much excellent experience with you favorite transmitter. This module is compatible with the Multi-module project on github. It’s based on STM32 microcontroller. All available protocols are included in serial mode. In this mode, it uses a serial protocol to communicate with your transmitter. The serial protocol does not require any hardware modifications, but you should update the firmware on your transmitter to the latest. Then the model protocol selection and binding is done from the Model Settings menu on your transmitter. For telemetry capable transmitters, the telemetry integration is done seamlessly with the transmitter firmware. How to use: 1. Refer to the website above, update your transmitter with proper firmware. 2. Screw down the antenna of module tightly, and then install TX Module to the module bay of your transmitter. 3. Power on your transmitter, enter Model Settings menu, turn on External RF , and select ‘MULT’ mode, then you will see the bind and protocol button in the menu, and then you can choose a proper protocol for you model and bind with it now.  LED State:Notice: 1. Make sure to check the ‘multimodule’ option, when you update OpenTX firmware through Companion software. 2. In serial mode, for FRSKY and S-FHSS protocol, you may need set the value of Fine or Option (in Model Settings menu on your TX) properly to bind with your model. The value can be varied, since it’s partly depended on your model. Available protocols (incomplete and expanding)

Specification:

ID:1346927 – SKU992866