iFlight TITAN DC5 V1.4 6S w/Caddx Air Unit Polar Digital HD BNF Build-in DJI Receiver FPV HD Goggle V2 FPV Racing RC Drone

€384 €482
Banggood
iFlight TITAN DC5 V1.4 6S w/Caddx Air Unit Polar Digital HD BNF Build-in DJI Receiver FPV HD Goggle V2 FPV Racing RC Drone
iFlight TITAN DC5 V1.4 6S w/Caddx Air Unit Polar Digital HD BNF Build-in DJI Receiver FPV HD Goggle V2 FPV Racing RC Drone
€384 €482

SaveSavedRemoved 0

ONLY €384 for iFlight TITAN DC5 V1.4 6S w/Caddx Air Unit Polar Digital HD BNF Build-in DJI Receiver FPV HD Goggle V2 FPV Racing RC Drone – TITAN DC5 Drone

 

*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line

 

For more iFlight offers – HERE
For Banggood Coupons see – HERE

 

 

Join Our Telegram Channel

 

F
EATURES

– Caddx Air Unit Polar Digital HD System

– No props in the view, and everything you need to bind and fly!

– Optimized weight distribution: DJI unit and Stack centered 

– Equipped with SucceX-D F7(50A 4-in-1 ESC) Stack

– Equipped with the Caddx Air Unit Polar Digital HD System Unit -Bind and Fly

– Buttery-smooth 720p 120fps FPV feed

– Pre-tuned with smooth freestyle settings

– Full 3K Carbon Fiber airframe with chamfered arms

– Equipped with XING 2207 motors

– Weight: 424 g without battery

– Recommend Lipo (Not Included): TATTU 22.2V 1050mAh 95C 6S Click For Spare Parts.  

Changelog 1.3 to 1.4:
The new version has an improved arm design. Increased strength and width at the screwed anchor points, increased carbon thickness from 5mm to 6mm. All earlier versions of the DC5 V1.4 are compatible.

 

– Weight 150.4g (with TPU parts, and battery anti-slip pads)

– Wheelbase: 222mm

– Main body dimension: 185*133mm

– Bottom to top distance: 35mm

– Arm thickness: 6mm

– Bottom plate thickness: 3mm

– Top plate thickness: 2.5mm

– Camera plate thickness: 1.5mm( 2.5mm included TPU inserts)

 
ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC)
:   • Universal USB Type C connector instead of micro USB • Plug-and-Play. No need to solder tiny wires • Designed to support DJI Digital FPV.

PRE-TUNED & PRE-SETUP:

– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”

– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”

 
BNF-DJI Version Package Included:

– 1x TITAN DC5 V1.4 HD Frame

– 1x DJI HD FPV Goggles V2

– 1x Caddx Air Unit Polar Digital HD System

– 2x TPU camera side plate soft mount

– 1x iFlight Lipo Strap 

– 2x Nazgul 5140 Propeller (Set of 4 – Color May Vary)

– 4x XING 2207 Motor Unibell4S 2450KV6S 1800KV

– 1x SucceX- F7 Flight Controller

– 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S

– 2x MMCX to RP-SMA Female Adapter Cable

 Additional Suggested Parts (not included)  *DJI HD FPV Goggles V2 *DJI Remote Controller (Mode 2) *Battery 6S 1250mAh  

BNF-DJI+DJI Goggles V2 Version Package Included:

– 1x DJI Goggles V2

– 1x TITAN DC5 V1.4 HD Frame

– 1x DJI HD FPV Goggles V2

– 1x Caddx Air Unit Polar Digital HD System

– 2x TPU camera side plate soft mount

– 1x iFlight Lipo Strap 

– 2x Nazgul 5140 Propeller (Set of 4 – Color May Vary)

– 4x XING 2207 Motor Unibell4S 2450KV6S 1800KV

– 1x SucceX- F7 Flight Controller

– 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S

– 2x MMCX to RP-SMA Female Adapter Cable

 Additional Suggested Parts (not included) *DJI Remote Controller (Mode 2) *Battery 6S 1250mAh

 

ID:1594480 – SKUD94418

1594480CN

Kupon4U.com
Logo
Enable registration in settings - general