ONLY €84 for HGLRC RekonFPV Rekon 3 Nano Long Range 1S 3″ 140mm Wheelbase FPV Racing RC Drone Zeus5 AIO CADDX Nano ANT Rekon 1202.5 11600KV Motor – FrSky R-XSR Receiver
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more HGLRC offers – HERE
For Banggood Coupons see – HERE
The Rekon3 is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell. You insert the battery just like you would in a TV remote and immediately you are ready to fly for over 15 minutes. This means you can fit enough batteries to fly for several hours in your pocket! The Rekon3 is also extremely quiet and small; Perfect for flying in your back yard or a public park without bothering anyone, exploring an epic mountain landscape or simply cruising along wherever you want.
But despite its small size and simplicity, do not underestimate the Rekon3: The cruising speed is higher than you probably expect and since it is equipped with a powerful 350mW VTX the Rekon3 has several kilometers of video signal range
Key Feature:
- Running on a standard 18650 battery (high c rated cell required, we recommend Sony VTC6 or similar)
- Specific Rekon 1202.5 11600kV Motors running 3” props
- Small and light (62.5g without battery, 140mm motor to motor)
- Supports WIFI tuning via Speedy Bee on your mobile phone
- Powerful 350mW video transmitter for several kilometers of video range
- Electronics configuration allows you to fully discharge the cell down to 2.6V
Description:
Brand: HGLRC RekonFPV
Item Name: Rekon3 3″ RC Drone
Weight: 62.5g (without receiver)
Package Included:
1x Rekon 3 Long Range Frame
1x Zeus5 AIO flight controller
1x Zeus nano VTX 350mW
1x CADDX nano ANT FPV camera
4x Rekon 1202.5 11600KV brushless motors
8x GEMFAN 3018 3-inch 2-blades propeller
1x IPEX copper tube antenna
1x Receiver (optional)
Specification:
Rekon3 Long Range Frame | Wheelbase:100% Max prop size:3 Inch |
Zeus5 AIO 1-2S flight controller | Input voltage:1-2S Flight control firmware:Betaflight HGLRC411 (HGLR) ESC firmware:BLHeli_S Size:41.5*41.5mm |
Zeus nano VTX 350mW | Output power:PIT/25/100/200/350mW Input voltage:DC 5V |
CADDX Nano ANT FPV Camera | Image sensor:1/3 1000TVL CMOS Input voltage:DC 5V Size: 14mm * 14mm |
Rekon 1202.5 KV11600 brushless motor | Input voltage:3.8V (1S) Recommended propeller:3 Inch |
GEMFAN 3018 3 inch 2-blade propeller | Quantity:4 CW & 4 CCW |
Receiver (Optional) | PNP without receiver Frsky XM+ receiver TBS Crossfire Nano receiver Frsky R-XSR receiver Flysky A8S V2 receiver |
Recommended battery ( not included ) | 1S: 18650-3000mAh |
ID:1836159 – SKUH58517