HGLRC Rekon5 Long Range FPV Racing Drone F722 mini Flight Controller 28A 4in1 ESC 2004 Motor CADDX Nebula Nano
€229
€357
SaveSavedRemoved 0
ONLY €229 for HGLRC Rekon5 Long Range FPV Racing Drone F722 mini Flight Controller 28A 4in1 ESC 2004 Motor CADDX Nebula Nano – Flysky FS-A8S V2
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more HGLRC offers – HERE
For Banggood Coupons see – HERE
Concept
The REKON 5 is based on the original Dave_C FPV MiniLongRange design. This five-inch platform is an evolution
of the MicroLongRange concept adapted to carry more payload. Like its smaller 4″ cousin, this 5″ platform can reach flight times of over 25 minutes while being very quiet, efficient, and relatively low cost compared to 7″ quads that are usually used for long-range flights. The main advantage of 5″ compared to the 4″ is the ability to carry
loads like GoPros and LithiumIon batteries without affecting flight performance and noise level too much. On top of that, the cruising speed is increased and the ability to do acrobatic freestyle maneuvers is noticeably improved. This platform can also be used with a wider variety of batteries depending on the intended use: 850-1800mAh on
the 4S version and 550-1300mAh on the 6S version will work without issues. Both versions are also compatible
with 3000mAh 4S Li-Ion packs if you are looking for maximum flight time.
Frame Design
The REKON 5 features an innovative frame design using single piece front and rear arms locked by an aluminum
bolt. The bolt is used to create a strong and stiff center section of the frame, locking the arms and de-coupling forces from the rest of the frame. This allows the use of use very light M2 hardware and thin carbon plates on the other parts of the frame, reducing the overall weight for maximum efficiency. On top of that, the bolt makes it possible to apply much more torque and it’s not prone to break or strip like M2 or M3 hardware often does. A lot of attention was also put toward the design of the front and camera mount. Dead cat frames are inherently prone to take heavy impacts in this area since the arms are swept backward and the front is exposed. This is why the REKON5 uses a flexible, 3D printed canopy supported by a carbon brace to absorb impact energy and protect the camera in case of a crash.
Key Features
– Lightweight frame with 10mm aluminum bolt construction, compact 25/20mm standoff split deck main body for double 20×20 stacks
– Shock absorbing TPU front with integrated GoPro mount
– Foldable crosfire immortal T-mount inspired by Alexandre Arvinte (@ledrone.club)
– Mild dead cat design reducing the props in view while not affecting flight performance
– Optional braces for improved vibration dampening and crash resistance
– Optimized for 2004 – 2204 motors with 12×12 M2 mounts
– GPS mount for M80 GPS
– External buzzer mount for Soter Buzzer
Description:
Brand: RekonFPV
Item Name: Rekon 5″ FPV Racing Drone 4S CADDX Nebula Nano Version
Net Weight: 223.5g (Weight without receiver)
| Rekon Freestyle Frame 5 inch | Type:5″ frame Wheelbase:210mm Support for propellers:Up to 5 inches Overall size:210 * 155mm Weight:53g (Including TPU) |
| Zeus F722 mini Flight Controller | MPU:MPU6000 CPU:STM32F722 RET6 Input Voltage:3-6S Lipo BEC Output:5V/3A,9V/2A Weight:8.1g |
| Zeus 28A BL32 3-6S 4in1 ESC | CPU:STM32F051 Input Voltage:3-6S Lipo Steady Current:28A Peak Current:35A (10 Sec) Weight:7g |
| CADDX Nebula Nano | Operating Frequency:5.725-5.850 GHz Input Power:7.4-26.2V Channels:8 |
| 2004 2600KV Brushless Motor | No.of Cells(Lipo):16.8 V (4S) Recommended Prop(inch):5Inch Weight:15.5g |
| M80 GPS | M80 GPS Power Supply:5V Size:18.5mm x 18.5mm x 7.1mm Weight:9.4g |
| Soter FPV drone buzzer | Input voltage: 5V Size:22mm x 12mm x12mm Weight:4g |
| Propeller | GEMFAN 5125 5 Inch 3-Blades propeller Quantity:4 CW & 4 CCW |
| Recommended battery | 4S: 850mAh-1300mAh (Not Included) |
Specification:
ID:1803997 – SKUH10980
