Save big on the Happymodel ELRS Fyujon V2.0 2IN1 AIO module Built-in ELRS 2.4GHz EP Receiver and 5.8G 48CH OpenVTX for Toothpick Cinewhoop FPV Racing Drone at Banggood. Use our exclusive coupon to get it for just 22€.
*PLEASE NOTE for European Union VAT: Goods purchased with our COUPON and delivered to the destination located in the European Union (EU), VAT and duties (if applicable) have been included in their COUPON prices and there is no need to pay additional taxes.
For more Happymodel offers – HERE
For Banggood Coupons see – HERE
Product Review: The Happymodel ELRS Fyujon V2.0 2IN1 AIO module Built-in ELRS is designed for Toothpick Cinewhoop FPV Racing Drones. It features a 2.4GHz EP Receiver and a 5.8G 48CH OpenVTX. This product has received great reviews and is highly recommended for FPV enthusiasts.
Happymodel ELRS Fyujon V2.0 2IN1 AIO module Built-in ELRS 2.4GHz EP Receiver and 5.8G 48CH OpenVTX for Toothpick Cinewhoop FPV Racing Drone Description:
Brand: Happymodel
2.4GHz Receiver Specifications:
Type: ISMES
P8285 MCU
SX1280/1281
IMLTRT RF Module
SMD Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working Voltage: 5v
Antenna: Onboard SMD ceramic antenna or IPEX1 connector for external 2.4Ghz antenna
SMD Ceramic Antenna Peak gain: 3.7Db
ELRS Firmware target: HappyModel EP 2400 RX
5.8GHz VTX Specifications:
Frequency: 5.8G 48CH
Transmitting Power: 0/RCE/25mw/100mw/300mw
Power supply: DC 5V
Current (5v): <650ma (300mw)
SmartAudio ready
Presenting the new Happymodel Fyujon V2 Board with the following features:
* All holes are now M3 which can be converted to M2 using rubber grommets
* Supports 20mm/25.5mm/30mm mounting
* 4 Mounting support structures for added durability
* Better shape to avoid sharp edges
* Ability to switch between SMD or IPEX antenna (Default antenna is SMD ceramic)
* IPEX 1 rotated by 90° for added durability
* Improved circuitry
The ELRS Fyujon is a very simple and easy-to-use 2-in-1 module that integrates 5.8GHz video transmission and 2.4GHz ELRS receiver. It can be integrated into a board for use, or split into independent VTX and receiver modules to be used separately. It is an open-source solution that is currently very popular with FPV pilots. This module is compatible with 20mmx20mm, 30mmx30mm stack mounting, and 25.5mmx25.5mm whoop mounting. With its ultra-lightweight design (only 2.1 grams), it is a perfect choice for small toothpick quads or analog version Cinewhoops.
Notes: The ELRS RX and OPENVTX share the same Power input and GND pads, so if you use both ELRS RX and VTX, you only need to solder one Power input and GND.
Pros and Cons
Pros:
- Integration of 2.4GHz ELRS receiver and 5.8GHz video transmission
- Open-source solution
- Compatible with various mounting options
- Ultra-lightweight design
Cons:
- Limited power options
- May require soldering for certain configurations
Coupons Price History
Price History for Happymodel ELRS Fyujon V2.0 2IN1 AIO module Built-in ELRS 2.4GHz EP Receiver and 5.8G 48CH...
Statistics
Current Price | €22.00 | October 18, 2023 |
Highest Price | €22.00 | October 18, 2023 |
Lowest Price | €22.00 | October 18, 2023 |
Last price changes
€22.00 | October 18, 2023 |
OLD COUPONS
Here we publish the expired coupons, but you can try them anyway (from the oldest to the newest): NONE
ID:1988526 – SKUK15935