ONLY €78 for GEELANG AMG65X 65mm 2S Whoop FPV Racing Drone Play F4 Flight Controller OSD 5A ESC GL0802 14000KV Motor 200mW VTX – Without Receiver
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more GEELANG offers – HERE
For Banggood Coupons see – HERE
Features:
Use Play F4 flight controller to support 1-2s lithium battery power supply. Integrate Betaflight OSD function, keep abreast of the flight voltage, receiver signal, and observe the situation in real time while flying.VTX comes with Smartaudio function, you can adjust the flight control parameters through the OSD, adjust the flight control PID, and adjust the VTX frequency parameters.Completely assembled and debugged, you can fly with the remote control 2s 65X, 40MM three-blade propeller, surging power and lasting flight time.Support Betaflight tuning, multiple flight modes, carefully adjusted by the original factory, suitable for novice flight practice, stable style.
Use an integrally molded plastic frame of special material. Strong structure and light weight. The helmet with unique carbon fiber and tpu printing is unique and durable.Multiple versions of receivers are used independently, and the electronic control is more stable. The flight control adopts the newer version of Betaflight 4.2.Compared with the conventional 65x 1s, the power is more confident. Violent flight takes longer.
Description:
Brand: GEELANG
Mode Name: AMG 65X WHOOP
Item Name: 2S 100mm Brushless Whoop racer drone BNF
Wheelbase: 65mm
Size: 93x93x37mm
Weight: 34g(without battery)
Package Included:(Optional)
2x 65mm integrated plastic frame
Option1: Play F4 FC external Frsky EU-LBT xm+ receiver
Option2: Play F4 FC external FLYSKY 2A receiver
Option3: Play F4 FC external TBS NANO receiver
Option4: Play F4 FC PNP NO RX receiver
4x GL0802 KV14000 Motor
1x 1630mm propeller(4cw+4ccw)
1x 5.8G 200mW VTX
1x Screwdriver Removal Tool
1x Battery Installation TPU Sleeve
1x Handbag
1x Propeller Disassemble Tool
1x Screwdriver
2x 1s 300mAh Battery
1x USB 2-in-1 Charger
Specification:
Motor | Mode: GL100% Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.5mm Weight(g):1.9g No.of Cells(Lipo):1S-2S |
Flight controller | Flight controller:Play F4 whoop Version:F411CEU6 MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size:28.5 * 28.5MM Power supply: 1-2S battery input (DC 3.2-8.4V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5V 2A BEC Built-in voltage detection Firmware version:Betaflight Configurator4.2.0 |
Onboard 4in1 ESC | Onboard 4in1 ESC MCU upgraded to EFM8BB21 Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v) Current: 5A continuous peak 7A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_77.HEX Default protocol: DSHOT600 Power input: XT30 |
5.8G VTX | Power switching: third gear(25MW 、 100MW 、200MW) Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready(Frsky EU-LBT and DSMX version not compatible) Weight: 1.7g |
Camera | Runcamnano4 Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 800 TVL TV System: NTSC Lens: 2.1mm(m8)FOV155° Dimensions: 14*14mm Wide Power Input: DC 3.7-18V Weight: 2.9g (N.W.) |
Propeller | Brand Name: Gemfan1630 Product name: 40MM 1mm PC propeller Length/inch: 40mm color: red Material: PC Weight: 0.4/piece |
Receiver (Optional) | PNP receiver version Support any bus and other protocols, users can install by themselves
TBS NANO receiver version CRSF Protocol , Official TBS transmitter compatible Protocol: CRSF Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 500m
Flysky AFHDS 2A Receiver Version IBUS receiver Protocol: AFHDS-2A Channels: 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support
Frsky EU-LBT XM+ Receiver Version SBUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m Operating Voltage Range: 3.7~10V Operating Current: 30mA @5V Operating Range: Full range With RSSI output on board: Analog 0~3.3V Firmware upgrade-able, can be upgrade to EU-LBT with RSSI
|
Battery recommended(Not Included) | Species: lipo、lipoHV Capacity: 250、300、450mah Voltage: 3.8v x2 Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Connector: XT30
|
ID:1875600 – SKUH73859