ONLY €206 for Eachine Novice-III V2 135mm 2-3S 3 Inch FPV Racing Drone RTF & Fly more w/ 5.8G 40CH EV800 Goggles 2.4GHz Jumper T-lite CC2500 Radio Transmitter Caddx Ant ECO 2.1mm Cam – Fly more 6x Battery Version
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more Eachine offers – HERE
For Banggood Coupons see – HERE
USA / CZ warehouse V1.0 version(ER8 2.4G Radio Control and Caddx EOS2 Camera) was sold out on Oct. 12.
V2.0 version coming soon.
V2.0 Upgrade:
2.4GHz Jumper T-lite CC2500 Radio Transmitter
Caddx EOS2 4:3 FPV Camera
User Manual, Download, V2.0Note: Please follow the user manual to unlocd the motor when you going to flying. It doesn’t need bind. RTF version has completed this step.
Brand Name: Eachine Item Name: Novice-III 2-3S Toothpick RTF & Fly more Wheelbase: 135mm Size: 115mm*110mm*40mm Weight: 62g(without battery)
Features: New toothpick F4 flight controller Internal SPI Frsky D8/D16 receiver (Dual antenna and with PA) Powerful and smoothly and long flight time (about 8~10 Mins) Led Strip ready Built-in Buzzer ready New design 1203 KV5500 motors Camera Angle adjustable VTX power switchable 25mw~400mw Smartaudio ready , change VTX bands, powers, channels via OSD 720P DVR ready (Analog 1280*720) Real Ready to fly Compatible both for 2s-3s Lipo/LIHV
Spare parts specifications:
Package Included: RTF Version 1 x 135mm Toothpick Frame 1 x F4 Flight Controller 4 x NC1203 KV5500 Motor 2 x HQPROP T3*2 bi-blade propeller (2cw+2ccw) 1 x Caddx And eco FPV camera
1 x Eachine Pegasu VTX: 5.8g 25mw~400mw switchable built-in 720p DVR 2 x Eachine 11.1v 450mah 75C Battery 1 x 2-4S Balance Charger 1 x Eachine EV800 Goggles 1 x Jumper T-lite CC2500 2.4GHz radio transmitter
1 x Propeller Disassemble Tool 1 x Screwdriver Fly more Version 1 x 135mm Toothpick Frame 1 x F4 Flight Controller 4 x NC1203 KV5500 Motor 2 x HQPROP T3*2 bi-blade propeller (2cw+2ccw) 1 x Caddx And eco FPV camera 1 x Eachine Pegasu VTX: 5.8g 25mw~400mw switchable built-in 720p DVR 6 x Eachine 11.1v 450mah 75C Battery 1 x 2-4S Balance Charger 1 x Eachine EV800 Goggles 1 x Jumper T-lite CC2500 2.4GHz radio transmitter 1 x Propeller Disassemble Tool 1 x Screwdriver
Specification:
Motor | Mode: EX1203 KV options: KV5500 Configu-ration:9N12P Stator Diamter:15mm Stator Length:3mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len):Φ15mm*15mm Weight(g):4.5g |
Flight controller | MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 2-4S battery input (DC 8V-17V) Built-in 12A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Frsky D8/D16 SPI receiver Built-in 2.4G Power Amplification Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 70A Built-in 5V 1.5A BEC Built-in voltage detection |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v) Current: 12A continuous peak 15A (5 seconds) Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_7.HE*
Default protocol: DSHOT600
|
Internal Frsky NON-EU receiver Version | SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter both D8 mode and D16 mode Channels: 8ch/16ch Dual antenna Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 400m |
VTX&DVR | Output power: 25~400mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 400mA(type) Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready Weight:3.4g |
Caddx Ant ECO Cam | 1/3″ CMOS Sensor 1200 TVL 2.1mm lens 4:3 Image size NTSC Global WDR Internal Synchronization |
Lipo Battery | Capacity:450mAh Voltage:11.4v Continuous Discharge Rate: 75C Size: 66mmx21mmx18mm Weight: 42g Connector: XT30 |
Eachine EV800 Goggles | Screen size: 5.0 inch Screen resolution: 800*480 (No blur after enlarge by the lens) Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV View Angle: 140/120 degree(Horizontal/Vertical) 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate no distort of light; Built-in 3.7V/2000mAh battery; Each battery circle offer around 3.5hr working time; 5-12V wide recharging voltage range, typical recharging voltage is 5V Accepts 5V power banks or 2S(7.4V)/3S(11.1V) battery as back-up power to have long working time |
Jumper T-lite CC2500 2.4GHz Radio transmitter | STM32F205 MCU OpenTX firmware Screen: 1.3″12864 High quality hall sensor gimbals lnternal Multi-protocol module lmproved R9M-LITE module slot, full speed TBS NANO Crossfire supported Built in USB-C charging Voice and Vibration function Spec: Size: 166*106*56mm Weight: 260g (with 18650) Voltage: DC3.5-4.2V Battery: 1×18650 (Battery not included) Channel: 16ch External Micro SD Card:reserved sD card slot |
ID:1596521 – SKUD67715