Eachine ET6 Horizontal Hit and Miss Complete Engine Model – BANGGOOD
ONLY 368€ with our EXCLUSIVE COUPON for Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Engine Toys – BANGGOOD
*PLEASE NOTE for European Union VAT: Goods purchased with our COUPON and delivered to the destination located in the European Union (EU), VAT and duties (if applicable) have been included in their COUPON prices and there is no need to pay additional taxes.
For more Eachine offers – HERE
For Banggood Coupons see – HERE
Product Review
This article is about the Eachine ET6 Horizontal Hit and Miss Complete Engine Model, which is a STEM Upgrade Gas Engine Toy. It is highly recommended as it has received many positive reviews. The model is made of brass and stainless steel and has a size of 180*125*125MM. It has a displacement of 6CC, a cylinder diameter of 22MM, an itinerary of 20MM, and a weight of 1610G. This unique engine features a horizontal design and uses water for cooling. It is equipped with a 90-degree helical gear transmission and a side valve design. To start the engine, you simply need to add petrol to the tank and insert a 3.7V battery. It is important to note that children should be accompanied by an adult when using this toy. The actual color of the item may vary due to different displays and lighting conditions. Manual measurement may result in slight differences.
Description:Brand: EachineName:Eachine ET6 Horizontal Hit and Miss Complete Engine ModelSize: 180*125*125MMDisplacement: 6CC.Cylinder diameter: 22MM.Itinerary: 20MM.Weight: 1610GMaterial: Brass And Stainless SteelThis is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working.The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine.You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Features:Engine startup steps:1.Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate.2.Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe.3.on the right side of the engine (installation of the flying hammer position), slowly turn counterclockwise by hand to buy more than one turn, its role can make the mixed gasoline fully enter the cylinder.4.Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (installing the flying hammer position).Precautions:1.If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted.2.screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio.Note:1.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.2.Please allow little differs due to manual measurement.3.Kids should be accompanied by adult.
Pros and Cons
Pros:
- High-quality construction using brass and stainless steel
- Unique horizontal design powered by gasoline and water cooling
- Equipped with a 90-degree helical gear transmission for smooth operation
- Easy to start by adding petrol to the tank and inserting a 3.7V battery
Cons:
- Manual measurement may result in slight differences
- Children should be accompanied by an adult when using this toy
OLD COUPONS
Here we publish the expired coupons, but you can try them anyway (from the oldest to the newest): NONE
ID:1720034 – SKUF74018
