[EU WAREHOUSE] Anycubic Photon Mono 3D Printer 130x80x165mm Build Volume

€170 €198
[EU WAREHOUSE] Anycubic Photon Mono 3D Printer 130x80x165mm Build Volume
[EU WAREHOUSE] Anycubic Photon Mono 3D Printer 130x80x165mm Build Volume
€170 €198

ONLY €170 for Anycubic Photon Mono 3D Printer 130x80x165mm Build Volume


*PLEASE NOTE that this coupon is valid FOR ALL 🇪🇺 EUROPEAN WAREHOUSES!🇪🇺 TAX FREE and FAST SHIPPING from Europe! To know more about GeekMaxi Warehouse and Customs TAX you can read HERE


For more European warehouses coupons click – HERE
For more Anycubic offers click – HERE
For more GeekMaxi Coupons click – HERE




Anycubic Photon Mono 3D Printer 

ANYCUBIC Photon Mono LCD screen Adopts matrix parallel light source 15 pcs lamp beads, is able to carry out uniform exposure, improve the quality of models, Z-axis guide rail structure and stepper motor have better stability, with an accuracy of 0.01mm, it effectively eliminating layer patterns, It’s a great 3D printer for printing games, movies, cartoon characters, miniatures, etc.

Photon Mono 3D Printer’s printing speed is 2.5X faster than the regular 3d printers, rapid prototyping greatly improved printing efficiency and saved more time, comes with a 6.08” 2K Monochrome LCD and only takes 1.5 seconds per layer exposure to cure resin.

Off-line printing function with size 5.11″(L) x 3.14″(W) x 6.49″(H) / 130 x 80 x165MM, Photon Mono resin 3d printer uses a removable one-piece transparent cover to make the internal space of the machine, and the printer can be set to stop printing immediately after opening the cover, Friendly use for beginners and good performance for the enthusiasts

The transparent cover blocks up to 99.95% of ultraviolet rays with a wavelength of 405nm, can be effective high resin solidification rate and ensure your success printing, reduce wasting of resin, New photon mono uses One-piece FEP, which can be easier and quicker to replace.

Faster Printing Speed

The fastest printing speed per hour of ANYCUBIC Photon Mono 3d Printer reaches 50mm/h, which is 2.5X faster than regular resin printers. Greatly reduce printing time and save your costs.

New Matrix Light Source

ANYCUBIC Photon Mono Resin 3d Printer uses 15 pcs lamp beads to make a new matrix parallel light source, which can spread the light source evenly and dissipate heat, and can well ensure the precision of the model during the printing process.

Support Multiple Slicing Software

ANYCUBIC Photon Mono 3d printer supports the use of Photon workshop, Chitubox, Lychee and other common slicing software, to meet different usage habits as much as possible.

2K Monochrome Screen

ANYCUBIC Photon Mono 3D Printer comes with a 6.08″ Monochrome LCD with 2K HD resolution. It only takes 1.5 seconds per layer exposure to cure resin, and service life is 4 times than that of RGB LCD screen, saves material and costs.

Easy Replacement of FEP

Photon Mono’s specific FEP strip steel ring, when replacing, only need to unscrew the screw, remove the old FEP film, replace it with a new one and tighten the screws. No special adjusting, simple and convenient.

UV-blocking Top Cover

The top cover blocks 99.95% of ultraviolet rays, which can reduce the influence of ineffective light during the printing process and ensure the model to be better cured.

Top Cover Detection

Photon Mono 3d Printer can be set to stop printing when the cover is opened. Just click the lock icon on the tool page to successfully set it up. If this is not needed, please cancel the setting under the same operation

High Quality Power Supply

All of ANYCUBIC 3D Printers power supply has UL certification, CE marking, and ETL certification. We ensure safe use.



ID: 1818


Enable registration in settings - general