45W MX-P50M HF Power Amplifier for FT-817 ICOM IC-703 Elecraft KX3 QRP FT-818 Xiegu G90 G90S G1M X5105
€151
€190
SaveSavedRemoved 0
ONLY €151 for 45W MX-P50M HF Power Amplifier for FT-817 ICOM IC-703 Elecraft KX3 QRP FT-818 Xiegu G90 G90S G1M X5105
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more 45W offers – HERE
For Banggood Coupons see – HERE
Features:
1. It is used in QRP transceiver to help increase the transmission power, enhance the signal, and improve the communication quality.
2. Small size, light weight, extremely small and light, easy to carry.
3. Fully integrated with FT-817 through the provided interface cable, the amplifier includes various protection circuits, such as high voltage, front LED display.
4. It can be used for fixed or mobile use outdoors, with overvoltage and anti-reverse protection, and can be used as a base and mobile unit.
5. The panel uses LED to display the band and emission status.
6. Good compatibility, can be successfully used with other QRP devices, such as ICOM IC-703 (and Elecraft KX3).
- Working frequency: 80m 40m 30m-17m 15m-10m
- Working mode: SSB CW AM
- Input power: 5W
- Output power: 45W
- Band control: manual
- Power requirements: 13.8V 8A
- Antenna interface: SO-239 50Ω
- Size: 155*100*35 (mm) length * width * height
- Weight: 0.55KG
Package included:
1x MX-P50M
1x power cord
1x ACC plug (connect FT-817ND FT-818)
1x 2.5MM plug (KX3 radio)
FT-817ND Quick Guide:
–Connect the power cord to the DC power supply, connect red to “+” and black to “-“
-Connect the ACC cable to the FT-817 ACC and amplifier
-Adjust the “BAND ADJ” button to select the frequency band.
-The antenna amplifier “ANT” and the “input” of the FT-817 antenna are not included. Please note that the antenna you use must be well adjusted, and the SWR must be less than 1:1.5
-Turn on the power supply and the power on the AMP.
-Turn on the power of FT-817 and indicate that the frequency band on the Amp is turned on.
-Press PTT, TX indicates that Amp must be turned on. Note that if you work on FM or SSTV for a long time, you should reduce the output power of FT-817, such as 2.5W or 1W.
Other QRP transceiver manuals:
Connect the acc cable to the transceiver PTT-TX and amplifier, ACC green to “GND”, red to “TX-PTT”, radio “TX-PTT” to see the manual.
ID:1883961 – SKUI28107
