Eachine AE65 7 Anniversary Limited Edition 65mm 1S Tiny Whoop FPV Racing Drone BNF CADDX ANT Lite Cam 5A ESC NX0802 22000KV Motor
ONLY €55 for 21g Eachine AE65 7 Anniversary Limited Edition 65mm 1S Tiny Whoop FPV Racing Drone BNF CADDX ANT Lite Cam 5A ESC NX0802 22000KV Motor – FrSky R-XSR Receiver
*PLEASE NOTE that to avoid customs duties, select Banggood Express or EU Priority Line
For more Eachine offers – HERE
For Banggood Coupons see – HERE
Eachine AE65 7 Anniversary Limited Edition comes with the most valuable 1s 65mm brushless whoop in 2020. Smooth and durable. Come with High performance Caddx FPV Ant lite camera and New ET2.0 plug. The weight only 21g. Simply bind it to your transmitter then you are ready to enjoy it.
：
Brand Name: Eachine Item Name: AE65 7 Anniversary Limited Edition (ONLY 500PCS)
Wheelbase: 65mm Size: 81mmx81mmx39mm Weight: 21g(without battery)
Features:
1s 65mm brushless whoop Eachine Limited Edition
21gram 1s brushless 65mm whoop
New AIO 4in1 CrazybeeX flight controller
Smooth and powerful
CADDX ANT Lite Camera
High performance ET2.0 plug
Advantage compared to the PH2.0 ★Solve the voltage sag problem ★15A continuous current, 20A burst ★1.0mm gilde banana connector decreased internal resistance
Receiver option:
External Frsky RXSR receiver version(ACCST D16 sbus output)
External TBS Crossfire Nano receiver version
Package Included:
1 x AE65 Frame and Canopy
1 x Receiver
Option1:CrazybeeX PNP V1.0 with External Frsky RXSR receiver
Option2:CrazybeeX PNP V1.0 with External TBS crossfire nano receiver
4 x Eachine NX0802 KV22000 Brushless Motor
1 x Gemfan 1219-3 Propellers(4cw+4ccw)
1 x Caddx Ant Lite Ultra Light Nano FPV Camera
1 x 5.8G 25mw 40ch VTX (Flight Controller built-in)
4 x 1S 250mah 30C LiHV Battery
1 x Multi Port LIPO/LIHV Battery Charger with 12V Adapter
1 x Screw Driver
1 x Propeller Disassemble Tool
1 x Eachine Handbag
Specification:
Flight controller | (External Frsky RXSR version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX (External TBS CRSF NANO version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver or no receiver Built-in 5V 1A BEC Built-in voltage detection | |
Motor | Mode: NX0802 22000KV Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g): 1.7g No.of Cells(Lipo): 1S only | |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21
Power supply: 1-2S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Default protocol: DSHOT600 | |
Propellers | Gemfan 1219-3 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm | |
Onboard 5.8g VTX | Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band Smartaudio ready | |
Caddx ANT Lite Camera | Image Sensor 1/3″ CMOS Sensor Horizontal Resolution 1200 TVL TV System NTSC/PAL switchable MENU SUPPORT IMAGE 16:9 Synchronization Internal Electronic Shutter PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio >52dB (AGC OFF) Video Output CVBS Lens 2.1mm Min. Illumination [email protected] Auto Gain Control YES BLC YES WDR Global WDR DNR 2 DNR Dimensions 14mm*14mm Wide Power Input DC 3.7-18V Work Temperature -20℃~+60℃ Work Humidity 20%~80% Weight 1.5g (N.W.) | |
Lipo Battery | Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 55mmx12mmx7mm
Weight: 6.5g Connector: ET2.0 | |
Multi port Lipo/Lihv battery charger | Weight: 41g Dimensions: 82x51x22mm Input: DC 7V-22V Output switchable: Fixed at 200~600 milliamps Cutoff voltage switchable: 4.20v cell charging cutoff (+- 0.5% margin of error) for 1S Lipo Battery 4.35v cell charging cutoff (+- 0.5% margin of error) for 1S 3.8V LIHV Battery | |
External Frsky R-XSR receiver version | Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel) Operating Voltage Range: 3.5V~10V Operating Current:70mA@5V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode Could support Frsky New ACCESS Protocol ( Upgrade firmware) Weight: 1.5g | |
| External TBS CRSF Nano receiver version | Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible | |
ID:1735202 – SKUF87587
